SWG16 0Cr21Al4 / 0Cr19Al3 fecral firaka fanafanana tariby ho an'ny redrawing
SWG16 0Cr21Al4 / 0Cr19Al3 fecral firaka fanafanana tariby ho an'ny redrawing
Wire fanoherana vita amin'ny Nickel Chrome Alloys, Nickel Chrome Iron Alloys, Iron Chrome Aluminum Alloys, Copper Nickel Alloys.
Tena ampiasaina amin'ny heater, fanafanana singa sy ny resistor, sns.
NiCr 80/20, NiCr 70/30, NiCr 60/15, NiCr 35/20
CrAl 15-5, CrAl 20-5, CrAl 25-5, sns…
Constantan, Alloy 30, Alloy 60, Alloy 90, sns.
Ny fanoherana elektrika avy amin'ny 0,02 u ohm/m-1,53 u ohm/m
Temperature miasa manomboka amin'ny 200 C ka hatramin'ny 1400 C
Pls afaka mifandray aminay raha misy fanontaniana.
NiCr:
RESISTOHM 20, RESISTOHM 30, RESISTOHM 40, RESISTOHM 60, RESISTOHM 70, RESISTOHM 80
FeCrAl:
RESISTOHM 125, RESISTOHM 135, RESISTOHM 140,
RESISTOHM 145, RESISTOHM 153
CuNi
Constantan, Cuprothal 5, Cuprothal 10, Cuprothal 15, Cuprothal 30, Eurica
| FeCrAl Alloy Grade | Famoronana simika% | |||||||||
| C | P | S | Mn | Si | Cr | Ni | Al | Fe | Re | Ny hafa |
| max(≤) | ||||||||||
| 1Cr13Al4 | 0.12 | 0.025 | 0.025 | 0.7 | ≤1.00 | 12.5-15.0 | —- | 3.5-4.5 | 0.1 | Bal. |
| 0Cr15Al5 | 0.12 | 0.025 | 0.025 | 0.7 | ≤1.00 | 14.5-15.5 | —- | 4.5-5.3 | 0.1 | Bal. |
| 0Cr25Al5 | 0.06 | 0.025 | 0.025 | 0.7 | ≤0.60 | 23.0-26.0 | ≤0.60 | 4.5-6.5 | 0.1 | Bal. |
| 0Cr23Al5 | 0.06 | 0.025 | 0.025 | 0.7 | ≤0.60 | 20.5-23.5 | ≤0.60 | 4.2-5.3 | 0.1 | Bal. |
| 0Cr21Al6 | 0.06 | 0.025 | 0.025 | 0.7 | ≤1.00 | 19.0-22.0 | ≤0.60 | 5.0-7.0 | 0.1 | Bal. |
| 0Cr21Al4 | 0.06 | 0.025 | 0.025 | 0.7 | ≤1.00 | 21.0-23.0 | ≤0.60 | 3.0-5.2 | 0.1 | Bal. |
| 0Cr21Al6Nb | 0.05 | 0.025 | 0.025 | 0.7 | ≤0.60 | 21.0-23.0 | ≤0.60 | 5.0-7.0 | 0.1 | Bal. |
| 0Cr27Al7Mo2 | 0.05 | 0.025 | 0.025 | 0.7 | ≤0.40 | 26.5-27.8 | ≤0.60 | 6.0-7.0 | 0.1 | Bal. |
Ny firafitry ny simika sy ny toetrany:
| Propertes/Grade | NiCr 80/20 | NiCr 70/30 | NiCr 60/15 | NiCr 35/20 | NiCr 30/20 | |
| Ny singa simika fototra (%) | Ni | Bal. | Bal. | 55.0-61.0 | 34.0-37.0 | 30.0-34.0 |
| Cr | 20.0-23.0 | 28.0-31.0 | 15.0-18.0 | 18.0-21.0 | 18.0-21.0 | |
| Fe | ≤ 1.0 | ≤ 1.0 | Bal. | Bal. | Bal. | |
| Temperature miasa max(ºC) | 1200 | 1250 | 1150 | 1100 | 1100 | |
| Resistivity amin'ny 20ºC (μ Ω · m) | 1.09 | 1.18 | 1.12 | 1.04 | 1.04 | |
| Hateza (g/cm3) | 8.4 | 8.1 | 8.2 | 7.9 | 7.9 | |
| Conductivity mafana (KJ/m· h· ºC) | 60.3 | 45.2 | 45.2 | 43.8 | 43.8 | |
| Coefficient ny fanitarana mafana (α × 10-6/ºC) | 18 | 17 | 17 | 19 | 19 | |
| Taona mitsonika(ºC) | 1400 | 1380 | 1390 | 1390 | 1390 | |
| Elongation(%) | > 20 | > 20 | > 20 | > 20 | > 20 | |
| Rafitra mikrografika | austenite | austenite | austenite | austenite | austenite | |
| Magnetika fananana | tsy magnetika | tsy magnetika | tsy magnetika | tsy magnetika | tsy magnetika | |
| CuNi Alloys Grade | Ny fanoherana elektrika (20 degreΩ mm² / m) | mari-pana coefficient ny fanoherana (10^6/degre) | hakitroky g/mm² | Max.hafanana (diplaoma) | Taona mitsonika (diplaoma) |
| CuNi1 | 0.03 | < 1000 | 8.9 | 200 | 1085 |
| CuNi2 | 0.05 | < 1200 | 8.9 | 200 | 1090 |
| CuNi6 | 0.10 | < 600 | 8.9 | 220 | 1095 |
| CuNi8 | 0.12 | < 570 | 8.9 | 250 | 1097 |
| CuNi10 | 0.15 | < 500 | 8.9 | 250 | 1100 |
| CuNi14 | 0.20 | < 380 | 8.9 | 300 | 1115 |
| CuNi19 | 0.25 | < 250 | 8.9 | 300 | 1135 |
| CuNi22 | 0.30 | < 160 | 8.9 | 300 | 1150 |
| CuNi30 | 0.35 | < 100 | 8.9 | 350 | 1170 |
| CuNi34 | 0.40 | -0 | 8.9 | 350 | 1180 |
| CuNi40 | 0.48 | ± 40 | 8.9 | 400 | 1280 |
| CuNi44 | 0.50 | < -6 | 8.9 | 400 | 1280 |
Ny sokajy vokatra
-
0.07mm 0cr25al5 Electric fanoherana fanafanana Fec...
-
Kan-thal APM Fecral Alloys hafanana avo ...
-
0Cr15Al5 FeCrAl Alloy hafanana fanoherana tariby ho an'ny ...
-
FCHW-2 0Cr21AI4 FeCrAl fanafanana tariby / Strip ho an'ny R...
-
Fanafanana elektrika fanoherana boribory / tariby fisaka Nic...
-
FeCrAl Alloy A1 Kan-thal APM fanoherana Heatin...