Tongasoa eto amin'ny tranokalanay!
Constantan Flat Wire Varahina Nickel Alloy 6j40 Ribbon 0.4 * 2mm
New Constantan Flat Wire Varahina Nickel Alloy 6j11 Ribbon 0.4 * 2mm
| toetra | Resistivity (200C μ Ω. m) | Max.Temperature miasa (0C) | Henjana (Mpa) | Taona mitsonika (0C) | Haavo (g/cm3) | TCR x10-6/ 0C (20~600 0C) | EMF vs Cu (μ V/ 0C) (0~100 0C) |
| Ploralin'ny anarana iombonana Alloy | |||||||
| NC003 (CuNi1) | 0.1 | 200 | ≥ 250 | 1095 | 8.9 | < 100 | -12 |
| Toetra ara-batana | mimetatra | Hevitra |
| hakitroky | 8,94 g/cc | |
| Toetra mekanika | mimetatra | Hevitra |
| Herin'ny Tensile, Ultimate | 262 – 531 MPa | |
| Herin'ny tensile, Yield | 276 – 524 MPa | Arakaraka ny toe-po |
| Elongation at Break | 46,0 % | ny 50.8mm. |
| Modulus ny elasticité | 115 GPa | |
| Poissons Ratio | 0.310 | kajy |
| Machinability | 20 % | UNS C36000 (varahina manapaka maimaim-poana) = 100% |
| Shear Modulus | 44.0GPa | |
| Toetra elektrika | mimetatra | Hevitra |
| Ny fanoherana elektrika | 0,0000120 ohm-cm @Temperature 20.0°C | |
| Thermal Properties | mimetatra | Hevitra |
| CTE, linear | 17,5 µm/m-° C @Temperature 20.0 – 300°C | |
| Hafanana manokana | 0,380 J/g-° C | |
| Conductivity mafana | 64,0 W/mK @Temperature 20.0°C | |
| Tarehin-tsetroka | < = 1125 ° C | Liquidus |
| Liquidus | 1125 ° C | |
| Properties fanodinana | mimetatra | Hevitra |
| Temperature fanalefahana | 565 – 815 ° C | |
| Temperature miasa mafana | 815 – 950 ° C | |
| Component Elements Properties | mimetatra | Hevitra |
| Varahina, Cu | > = 91.2 % | |
| Iron, Fe | 1,30 – 1,70 % | |
| Lead, Pb | < = 0,050 % | |
| Manganese, Mn | 0,30 – 0,80 % | |
| Nickel, Ny | 4,80 – 6,20 % | |
| Zinc, Zn | < = 1.0 % |
CuNi44 votoaty simika,%
| Ni | Mn | Fe | Si | Cu | Hafa | Torolàlana ROHS | |||
| Cd | Pb | Hg | Cr | ||||||
| 44 | 1% | 0.5 | - | Bal | - | ND | ND | ND | ND |
Toetra mekanika
| Max Continuous Service Temp | 400ºC |
| Resisivity amin'ny 20ºC | 0.49±5%ohm mm2/m |
| hakitroky | 8,9 g/cm3 |
| Conductivity mafana | -6 (Max) |
| Tarehin-tsetroka | 1280ºC |
| Herin'ny tensile,N/mm2 Anelina, Malefaka | 340~535 Mpa |
| Henjana, N/mm3 Cold Rolled | 680~1070 Mpa |
| Elongation (anneal) | 25% (Min) |
| Elongation (cold rolled) | ≥Min)2%(Min) |
| EMF vs Cu, μV/ºC (0~100ºC) | -43 |
| Rafitra mikrografika | austenite |
| Magnetika fananana | tsy |
Soraty eto ny hafatrao ary alefaso aminay
