Fanamboarana Tariby CuNi40 / Constantan misy Enameled 0.1mm 220 Temper Polyimide
Mombamomba ny vokatra
Tariby CuNi40 / Constantan misy enamel 0.1mm 220 Temper Polyimide
Mombamomba ny vokatra
Ireo tariby fanoherana vita amin'ny enamel ireo dia efa nampiasaina betsaka tamin'ny resistor mahazatra, fiara
kojakoja, resistors amin'ny hodi-by, sns. mampiasa ny fanodinana insulation izay mety indrindra amin'ireo fampiharana ireo, ka manararaotra tanteraka ireo endri-javatra miavaka amin'ny coating enamel.
Ankoatra izany, dia hanao "ename coating" insulation amin'ny tariby metaly sarobidy toy ny volafotsy sy platina izahay rehefa manafatra. Azafady ampiasao ity "production-on-command" ity.
Karazana Insulation:
1) Tariby polyester mahatohitra, kilasy 130
2) Tariby polyester novaina, kilasy 155
3) Tariby fanoherana polyesterimide, kilasy 180
4) Polyester (imide) voarakotra tariby fanoherana polyamide-imide, kilasy 200
5) Tariby fanoherana polyimide, kilasy 220
| Constantan 6J40 | Constantan Vaovao | Manganin | Manganin | Manganin | ||
| 6J11 | 6J12 | 6J8 | 6J13 | |||
| Singa simika lehibe % | Mn | 1~2 | 10.5~12.5 | 11~13 | 8~10 | 11~13 |
| Ni | 39~41 | - | 2~3 | - | 2~5 | |
| Cu | HAFA | HAFA | HAFA | HAFA | HAFA | |
| Al2.5~4.5 Fe1.0~1.6 | Si1~2 | |||||
| Elanelana mari-pana ho an'ny singa | 5~500 | 5~500 | 5~45 | 10~80 | 10~80 | |
| hakitroky | 8.88 | 8 | 8.44 | 8.7 | 8.4 | |
| g/sm3 | ||||||
| Resistivity | 0.48 | 0.49 | 0.47 | 0.35 | 0.44 | |
| μΩ.m,20 | ±0.03 | ±0.03 | ±0.03 | ±0.05 | ±0.04 | |
| Fahafahana mivelatra | ≥15 | ≥15 | ≥15 | ≥15 | ≥15 | |
| %Φ0.5 | ||||||
| fanoherana | -40~+40 | -80~+80 | -3~+20 | -5~+10 | 0~+40 | |
| hafanana | ||||||
| Quotiety | ||||||
| α,10 -6 / | ||||||
| Termoelektrika | 45 | 2 | 1 | 2 | 2 | |
| hery ho an'ny varahina | ||||||
| μv/(0~100) | ||||||
Karazana tariby miboridana
| fototra NY FANANANA karazana | Cuni1 | CuNI2 | CuNI6 | CuNI10 | CuNi19 | CuNi23 | CuNi30 | CuNi34 | CuNI44 | |
| fototra simika fifehezan | Ni | 1 | 2 | 6 | 10 | 19 | 23 | 30 | 34 | 44 |
| MN | / | / | / | / | 0.5 | 0.5 | 1.0 | 1.0 | 1.0 | |
| CU | HAFA | HAFA | HAFA | HAFA | HAFA | HAFA | HAFA | HAFA | HAFA | |
| fara-tampony MIASÀ hafanana | / | 200 | 220 | 250 | 300 | 300 | 350 | 350 | 400 | |
| hakitroky g/sm3 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | |
| fanoherana amin'ny 20°C | 0.03 ± 10% | 0.05 ±10% | 0.1 ±10% | 0.15 ±10% | 0.25 ±5% | 0.3 ±5% | 0.35 ±5% | 0.40 ±5% | 0.49 ±5% | |
| hafanana koefisienan'ny fanoherana | <100 | <120 | <60 | <50 | <25 | <16 | <10 | -0 | <-6 | |
| tensile tanjaka mpa | >210 | >220 | >250 | >290 | >340 | >350 | >400 | >400 | >420 | |
| fanalavana | >25 | >25 | >25 | >25 | >25 | >25 | >25 | >25 | >25 | |
| mitsonika teboka °c | 1085 | 1090 | 1095 | 1100 | 1135 | 1150 | 1170 | 1180 | 1280 | |
| koefisienan'ny fitarihana herinaratra | 145 | 130 | 92 | 59 | 38 | 33 | 27 | 25 | 23 |
-
Phone
-
Mailaka
-
WhatsApp
-
WeChat
Judy
150 0000 2421
-
Ambony